8200115-Modifs Notice CacG#D82D
Recommendations for filling your cigar humidor
Your EuroCave cigar humidor has been designed to contain the
maximum possible number of cigars in completed safety. To
optimise storage capacity, please proceed as follows:
- Arrange your boxes of cigars evenly, taking care to leave space
for air to circulate.
- Also keep the loading density in your humidor uniform (don't
put all the boxes at the top or at the bottom).
- If you have sliding shelves, it is best to position these in the top
of the unit to facilitate daily access.
- Similarly, place a few of each type of cigar in the compartmented
display tray, and store the remaining cigars in their boxes. You
can then simply top up the display tray as the cigars are used.
Fitting shelf brackets
To move a sliding shelf, first remove all cigars, then remove the sliding shelf by sliding it
towars you while lifting the front part. Remove the sliding guides from the walls, while
making sure not to mix up the right and left guides. Then refit them as shown below:
Fitting the rear part of the guide
WALL
GUIDE
WALL
GUIDE
Then refit the sliding shelf as shown below:
SLIDING SHELF
GUIDE
16/01/06
14:11
Page 11
Fitting the front part of the guide
GUIDE
WALL
page 11
GUIDE
WALL