Adventys MOP4I Guide D'utilisation page 15

Eliectrictli connection
Connectiona of the generttor: connection plitte
ELECTRICAL CONNECTION
To be able to insert and connect each conductor in the terminal block:
1 /
Insert the end of a flat screwdriver upwards. The
maximum diameter of the rod must be 4mm.
1
Repeat the previous steps for each wire to be connected
Be careful not to push the wire
end too far into the jaw of the
terminal block!!!
NO
2 /
Then lift the screwdriver to allow the lowering of
the spring-loaded jaw of the terminal block contact.
!
2
YES
15