Publicité
Les langues disponibles
Les langues disponibles
DO-230SR
CARE AND MAINTENANCE
If you consistently use demineralized or distilled water, cleaning the tank is unneces-
sary.
RINSING OUT THE STEAM CLEANER
Normally, a periodic rinse of your steam cleaner will free it from deposits. This is
recommended every 10 – 15 tankfulls, to free up any scale deposits from the tank.
Fill the boiler with water and shake the cleaner vigorously. Tilt the cleaner upside
down to empty the boiler of water and any scale deposits.
DESCALING YOUR STEAM CLEANER
If the tap water in your area contains a high level of calcium deposits and you have
been using tap water to do your steam cleaning you should descale your unit after 10
– 15 tankfulls.
Step 1 Unplug the steam cleaner from the power source before you descale the
boiler. Allow to cool.
Step 2 Fill the boiler with 1 part vinegar and 4 parts water and leave overnight or
for a period of approximately 8 hours. Do not screw the safety/filler cap onto the
steam cleaner while you are descaling the boiler. Do not use the steam cleaner while
descaling solution is inside the boiler.
Step 3 After the period of soaking, turn the steam cleaner upside down to empty
solution from the boiler. Due to the fact that a small amount of solution will be left
in the boiler, it is necessary to rinse the boiler out with clean water 2 or 3 times. Your
steam cleaner is now ready for use.
ATTACHING THE SHOULDER STRAP
Using the detachable shoulder strap allows for greater freedom of movement when
both hands are needed for various cleaning tasks.
To attach the shoulder strap to the steam cleaner, simply snap the shoulder strap
hooks onto the connection rings on the unit body.
When using the steam cleaner with the shoulder strap, avoid rocking or tilting the unit
excessively as this may cause water to enter the hose and be discharged along with
the steam.
59
Publicité
