Publicité
Les langues disponibles
Les langues disponibles
DO-230SR
• Place the floor brush on the cloth and fold the cloth around both smallest sides of
the brush. Make sure the long sides of the brush will not be covered by the cloth.
• Attach the cloth under the hooks on top of the brush.
• The use of a cloth is necessary to absorb moisture and dirt. Always use dry cloths.
Wash the cloths with a strong detergent and bleach.
• When using a wash softener during washing, the scent of the wash softener will be
spread during steaming.
ATTENTION : The cloth around the brush can become very hot and cause burns.
Only touch the cloth when it has cooled down.
Working efficiently
• Clean vertical surfaces always from the top down, this way the dirty water cannot
soil already cleaned surfaces.
• Avoid moving the brush back and forth during cleaning.
• Use the detail brushes first for cleaning hard to reach places and corners.
• Remove dirt as quickly as possible, otherwise it will dry out and get stuck to the
surface again.
ADVICE CONCERNING THE USE OF THE STEAM SHARK
WOOD, VINYL AND MARBLE FLOORS
Use the floor brush with a white cloth. Move the brush as you are mopping. When the
cloth is soiled, allow to cool, then turn the cloth over or replace it with a clean cloth.
If you are working on a very dirty area, you can move the brush over the area slowly,
several times. If it is a wood floor, move fast to avoid heat or moisture build up in the
wood. By cleaning with the cloth over the brush, you will not affect the shine on the
floor.To strip wax
Use floor brush for open areas, detail brush for corners or tight areas – no towel, slow
strokes. Work a small area at a time – remove the emulsified wax from the floor.
When all of the wax has been stripped, immediately clean the floor and brushes with
water before residue has a chance to harden on them. Go back over the stripped area
with the floor brush with a towel to remove any remaining residue before waxing.
TO CLEAN WAxED FLOORS
Wrap clean towel around the floor brush, brush quickly. This will cause the dirt to be
removed, but not the wax.
VINYL FLOORS
Do not allow the heat to build up on any kind of vinyl, since it can soften it enough to
affect its texture. Work fast on vinyl.
55
Publicité
