Teka RSF 41160 BU Mode D'emploi page 6

1
Do not use steam or steamed clea-
•
ning materials for cleaning the ref-
rigerator and melting the ice insi-
de. Steam may contact the electrifi-
ed areas and cause short circuit or
electric shock!
Do not wash the product by spra-
•
ying or pouring water on it! Danger
of electric shock!
In case of malfunction, do not use
•
the product, as it may cause electric
shock. Contact the authorised servi-
ce before doing anything.
Plug the product into an earthed
•
socket. Earthing must be done by a
qualified electrician.
If the product has LED type lighting,
•
contact the authorised service for
replacing or in case of any problem.
Do not touch frozen food with wet
•
hands! It may adhere to your hands!
Do not place liquids in bottles and
•
cans into the freezer compartment.
They may explode.
Place liquids in upright position after
•
tightly closing the lid.
Do not spray flammable substances
•
near the product, as it may burn or
explode.
Do not keep flammable materials
•
and products with flammable gas
(sprays, etc.) in the refrigerator.
•
•
1
•
•
•
•
•
1.1.1 HC warning
system using R600a gas, take care
to avoid damaging the cooling system
and its pipe while using and moving the
product. This gas is flammable. If the
cooling system is damaged, keep the
8
Do not place containers hol-
ding liquids on top of the product.
Splashing water on an electrified
part may cause electric shock and
risk of fire.
Exposing the product to rain, snow,
sunlight and wind will cause electri-
cal danger. When relocating the pro-
duct, do not pull by holding the door
handle. The handle may come off.
WARNING: When positioning the
appliance, ensure the supply cord is not
trapped or damaged
WARNING: Do not locate multiple
portable socket-outlets or portable
power supplies at the rear of the
appliance.
Take care to avoid trapping any part
of your hands or body in any of the
moving parts inside the product.
Do not step or lean on the door, dra-
wers and similar parts of the refri-
gerator. This will cause the product
to fall down and cause damage to
the parts.
Take care not to trap the power cab-
le.
If the product comprises a cooling
EN