Publicité
Les langues disponibles
Les langues disponibles
DOOR CONVERSION
If you need to hinge the door on the opposite sides it is recommended that you call your local authorized service agent to make this conversion or
ask a technician.
Before you reverse the door, you should ensure the appliance is unplugged and empty.
It is recommended to use screwdrivers and a spanner (both not supplied).
1. Dismantle the screw hole caps, screws and handle. Remove the plastic screw hole caps from the
other side.
2. Dismantle the upper hinge cover, screws and upper hinge. Remove the hole cover from the other
side. Unplug the wiring connectors on the right side of the top of the appliance.
Wiring connectors
3. Dismantle the door and right bottom hinge assembly (hinge shaft, adjustable foot and hinge), disassemble the right bottom hinge assembly, and
assemble the hinge shaft and adjustable foot on the other side of the hinge, then assemble the whole hinge assembly on the other side of the appliance.
4. Remove the door upper cover, install the upper hinge sleeve, door signal line to the other side and install the door upper cover.
Dismantle the right door stopper, sleeve pipe from the right bottom of door, and insert the sleeve pipe into hinge hole of left bottom of door, and take out
left door stopper from the accessory bag, and assemble it on the left bottom of door. Please keep the right door stopper for future use.
5.
9
Publicité
