MILL Silent Pro Serie Manuel D'instructions page 12

10 10 millnorway.com
Activate WiFi
Press WiFi button 1 time
Access point
Press WiFi button for 10 seconds. Once in appmode the WiFi light will do a slow blink.
Button operation (Mill Silent Pro Compact)
NOTE! The Filter change status symbol is always visible (when the display is lit).
It shows the filter lifetime remaining status with different colors.
Manual mode (Mill Silent Pro Compact)
Power ON/OFF
Short press the power button to turn on or off the device
Mode
Press Fan Speed/Mode button for 1 seconds to switch from AUTO to Manual or back
Fan levels
Press Fan Speed/Mode button 1 time to cycle between fan levels.
Cycle is: sleep mode – F1-F2-F3-F4-F5 – Boost mode.
When connected to the cloud the fan levels go from F1 to F8, so an increase of 3 fan
levels. Please note that the fan level lights also indicate the air quality as colors described
on page 12.
Enter Boost mode
Press Fan Speed/Mode button 1 time to cycle between fan levels until you reach
Boost level
Enter Sleep mode
Sleep mode is only possible to enable/disable in the App → sleep icon lights up.
Enter/Exit change brightness mode
This option is only possible using the app
Enter/Exit child lock
Press Fan Speed/Mode button and WiFi button at the same time for 5 seconds → lock icon
lights up/goes off.
Touch display
Remove film
before use
WiFi button
Power button
IAQ status
Fan levels
Mode button