8
8
millnorway.com
Product set up (first use) applies
to both models
STEP 1. Open the front cover
Pull forward holding the center
handle of back cover. It is separated
after the hooks below edges
are unlinked.
STEP 3. Assembly filter
Put the filter back in to the air purifier
and attach the front cover.
Filter change
Repeat step 1-3 above and replace with a new custom-made HEPA 13 filter from Mill.
Many air purifiers have a timer. The air purifier tells you when to change the filter based
on hours in use. Mill Silent Pro Air Purifier tells you when to change the filter based on
smart algorithm and the actual volume of particles measured. This ensures everyday filter
efficiency if air is more polluted than average.
The filter should last up to 12 months before a filter change is needed, depending on your
indoor air quality.
b
STEP 2. Remove filter bag
Pull out the HEPA 13 filter and
remove the plastic bag off the filter
before use.
STEP 4 . Connect to power
Connect the power cord to the
air purifier and use a socket only
for 220 – 240 V for the electric plug.