MILL Silent Pro Serie Manuel D'instructions page 11

Button operation (Mill Silent Pro)
Touch display
Remove film
before use
NOTE! The Filter change status symbol is always visible (when the display is lit) It
shows the filter lifetime remaining status with different colors.
Manual mode (Mill Silent Pro)
Power ON/OFF
Short press the power button to turn on or off the device
Mode
Short press the mode button to switch between auto mode or manual mode
Fan levels
Short press left or right arrow to adjust
Enter/Exit change brightness mode
Press mode button for 3 seconds → bulb icon lights up/goes off
>= higher the brightness
<= lower the brightness
Enter/Exit child lock
Press mode + WiFi button for 5 seconds → lock icon lights up/goes off
Enter Boost mode
Press right arrow for 3 seconds. Please note that short press can also enter Boost mode
when based on level 8.
Enter Sleep mode
Press left arrow for 3 seconds → sleep icon lights up.
Short press right arrow exit sleep mode.
Enter hard off mode
Press power button for 3 seconds → power button stays lit.
Soft reset
Press WiFi button for 5 seconds. Count down and then release once 5 seconds or more
have passed (will soft reset after button release).
Hard reset
• Turn off device
• Turn device on
• Within 10 second press mode for 10 seconds. This will hard reset the device.
WiFi button
Power button
Fan levels
Mode button
9