Operation With A Wall Thermostat; Setting The Holiday Function - eQ-3 Comfort Mode D'emploi

Press and hold down the menu button for more than
•
3 seconds.
Use the setting wheel to select the "UnL" menu item.
•
Confirm with OK.
•
"ACC" will appear on the display; press OK to confirm.
•

8. Operation with a wall thermostat

If the actuator is going to be operated in conjunction with
a wall thermostat, this thermostat will need to be taught in
(see section 6). Once it has been taught in, "ECF" will ap-
pear on the display. No further settings can then be made
on the actuator and it will no longer respond to taught-in
remote controls or window contacts.
If no wireless signal is received from the wall thermostat
for a period of 60 minutes, the actuator will exit ECF mode.
It will then assume control of the temperature, which it will
continue to regulate in accordance with the weekly pro-
gram until the next wireless signal is received.
To teach out a wall thermostat, you must reinsert the bat-
teries in the actuator (wait for approx. 1 minute). Once
you have entered the date and time of day, you can use
the menu button (before the adjustment run is initiated)
to perform the teach-out process as described in section 7.
If you want a fixed temperature to be maintained for a set
period of time while you are on holiday or during a party,
you can make use of the Holiday function.
Press and release the menu button repeatedly until the
•
suitcase symbol (
Use the setting wheel to set the end of the time period
•
during which the temperature is to be maintained.
• Press the OK button to confirm.

9. Setting the holiday function

) appears on the display.
27