Display Content During Normal Operation; Teaching In Wireless Components; Teaching Out Wireless Components - eQ-3 Comfort Mode D'emploi

Use the setting wheel to select menu items and the OK but-
ton to confirm your choice. Press the menu button again to
return to the previous level. After 65 seconds without any-
thing happening, the menu will close automatically.

5. Display content during normal operation

During normal operation, the following are dis-
played: day of the week, time of day, date, op-
erating mode, temperature setting and switch-
ing periods.
The bars indicating the weekly program's switching peri-
ods are shown for every other time interval. For an exam-
ple, please refer to "2. Weekly program: Examples".

6. Teaching in wireless components

The actuator supports the teaching in of up to 4 system
components (e.g. remote control and window contact plus
1 wall thermostat).
Press and hold down the OK button for more than
•
3 seconds.
The remaining teach-in time will be displayed (30 seconds).
•
• The device being taught-in now needs to send a wireless
signal (e.g. press button on remote control).
The display will then switch to the normal view.
•
Once this has been done, the actuator will respond to wire-
less commands from taught-in devices. Whenever the ac-
tuator receives a signal from a window contact or remote
control, the display will light up briefly.

7. Teaching out wireless components

Components that have been taught in on the actuator
can be taught out again using the "UnL" (Unlearn) func-
tion. All wireless components are taught out at once with
this function.
26