EtiamPro EDS150 Mode D'emploi page 6

6) Tap Next.
5. Set time and tap Next.
1) Select the Time Zone.
2) Tap Date Format and Time Format to set the time format.
3) Tap Time to set time manually.
4) Enable DST.Set the DST start time, end time and bias time.
7. OPTIONAL: If you typically use a standard setup, you'll only need to connect your outdoor video door
phone, either the EDS101B or EDS101S, to your Guarding Vision account. Adding the touchscreen
indoor station isn't required in this scenario.
However, if you do wish to include the indoor station, you can adjust the Guarding Vision service settings
as outlined below.1) Enable Guarding Vision service.
2) Edit verification code or use the activation password by default.
3) View Guarding Vision Server Status.
4) Scan the first QR Code to download the APP of Guarding Vision. Scan the second QR Code to add
your device to the APP. After adding the device to the APP, you can configure the device remotely.
5) Tap Next.
V. 01 – 08/03/2024
EDS150
Figure 2-10 Indoor Station Settings
Figure 2-12 Time Settings
6 ©Velleman nv