Publicité
Les langues disponibles
Les langues disponibles
–
Bind an email address. If you forget your admin password (activation password), you can change
the password via the reserved email address.
–
(Optional) Tap Change to Security Question to select security questions and enter the answers.
If you forget your admin password (activation password), you can change the password via
answering the questions.
4. Set network parameters and tap Next.
–
Enable Auto Get IP address, the device will get network parameters automatically.
Activate the switch. After receiving the ip-address, it will automatically be disabled again.
4. Configure the indoor station.
1) Select Device Type as Indoor Station or Indoor Extension.
2) Set Floor No..
3) Set Room No..
4) Configure advanced settings. Set Comminity No., Building No. and Unit No.
5) Set Registration Password. You can choose "same as the admin password" which is the easiest
configuration.
V. 01 – 08/03/2024
EDS150
Figure 2-3 Password Reset Page
Figure 2-9 Network Parameters
5
©Velleman nv
Publicité
