tomado THC2003W Mode D'emploi page 12

1. Air outlet
2. Handle
3. Power selection knob
4. Temperature control knob
5. Support
Before using the heater for the first time, proceed as follows: carefully remove the heater from its packaging and remove all
packaging material and any promotional stickers. Keep the packaging (plastic bags and cardboard) out of the reach of children.
After unpacking the appliance, check it for external damage that may have occurred during transport.
Select a suitable location for the heater. Make sure there is enough space around it for sufficient ventilation.
Check that the voltage corresponds with what is stated on the information plate and insert the plug in the socket. It is possible
that the heater smells "new" when used for the first time, this is entirely normal, will do no harm and the smell will disappear
automatically.
Support installation
1. Turn the heater upside down, with the bottom upward, and remove the screws from the heater.
2. Remove the supports. Aim the buckle on the support at the hole, push the supporting foot until the holes on support
coincides with the screw hole on the machine.
3. Screw on the removed screws through the support holes and tighten the screws in the heater.
4. After the installation is completed, turn the heater upwards for use.
PRODUCT DESCRIPTION
1
PRIOR TO FIRST USE
INSTALLATION
EN - 12
5
2
3
4