Publicité
Les langues disponibles
Les langues disponibles
Creation of operational readiness for securing persons
1
Set up the tripod vertically
Fold legs outwards by pressing on the locking pin
and pivoting the leg outwards until you hear it snap in.
In order to adjust the height of the individual extendable
legs, unlock the locking pin by pressing with the thumb
and sub-sequently pulling it out.
(
)
4
Extend the legs to the desired length and secure the latter
with locking pins. Repeat this procedure for the remaining
2 legs. Finally, align and position the tripod. Ensure
safe stand.To disassemble the tripod, repeat the above
procedure in reverse order.
Attachment points according to EN 795: 2012
Typ B
The attachment points
(
5
tection systems according to EN 360 and in combination
with safety harnesses according to EN 361 for a maximum
of 2 persons.
Adjustable rubber feet
The rubber feet feature a fold-away design for better
adaption to ground conditions.The horizontal position
is recommended for hard and stable ground. The vertical,
tip-standing position is recommended for softer ground
in order to prevent slipping
(
)
7
2
.
(
)
1
(
2
is suited for attaching fall pro-
)
.
ENGLISH
4
)
3
+
5
(
)
6
2 Anschlagpunkte
6
16
3
7
Publicité
