Publicité
Les langues disponibles
Les langues disponibles
Power Supply
= Dry Cell Operation
¢ Push and remove the battery compartment lid @ at
the back of the main body in the direction of OPEN
indication.
e Insert two dry cells IEC R6 (''AA"' cell) into the com-
partment. Take care that the cells are oriented for cor-
rect polarity.
e For taking out the cells from the compartment, ap-
ply the compartment lid @ as shown in the sketch
below.
= AC Line Operation (with optional AC adaptor)
® To power the unit from an AC mains outlet, purchase the optional AC adaptor. Plug
the AC adaptor into a convenient AC outlet, then insert the output plug from the adap-
tor into the [DC IN 3V] jack @ on the unit. This will automatically disconnect the inter-
nal batteries and supply power to the unit from the AC mains.
Note:
The center contact in the [DC IN 3V] jack @ of this unit requires a negative vol-
tage. Incorrect AC adaptors may provide a positive voltage to the center con-
tact, damaging the unit.
e If the unit is to be left unused or is to be powered from the AC adaptor for a prolonged
period of time, remove the dry cells from the unit. Otherwise, the cells may leak caus-
ing corrosion of unit parts.
How to Use the Unit Holder
Use the unit holder according to the No. of ''Usage of Unit Holder'' on page 2.
Precautions for Headphones Listening
Personal safety is everyones responsibility. We urge extreme caution in the use of per-
sonal stereo equipment in potentially hazardous situations such as jogging or bicycling
in public places. Under no circumstances should your personal stereo be used while
operating a vehicle of any type.
© Be aware that the prolonged use or use of personal stereo at excessively high volume
levels may be damaging to your hearing.
Publicité
