Olympia A 6040 Mode D'emploi page 18

Package Contents
Check the package contents of the laminator before putting the laminator
into operation. If anything is missing or damaged, do not put the lamina-
tor into operation. Contact our Service department.
■ Laminator A6040
■ Foil guide
■ Operating manual
Before You Start
Please observe the following information to ensure continued reliable
operation of the laminator.
■ Do not laminate metal, wet or uneven materials.
■ Always feed the laminating pouches into the laminator
the closed side first and aligned straight.
■ If necessary, only cut laminating pouches after laminating.
■ Please remember that hot laminated materials are permanently bond-
ed to the laminating pouch and cannot be separated from the foil
again without possible damage.
■ Do not pull the laminating pouch out of the
ing.
■ Only use laminating pouches which are suitable for hot lamination. For
an optimum lamination result, we recommend laminating pouches from
Olympia which are available from specialist retailers.
output
G
Package Contents
with
infeed
9
during laminat-
2
17