Télécharger Imprimer la page

Philips AVENT SCF860/20 Mode D'emploi page 8

Masquer les pouces Voir aussi pour AVENT SCF860/20:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20
EngliSh
8
Contact your Philips dealer or an authorised Philips service centre if the thermal cut-out is activated
too often.
To avoid a hazardous situation due to inadvertent resetting of the thermal cut-out, never connect
this appliance to a timer switch.
electromagnetic fields (eMF)
This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled
properly and according to the instructions in this user manual, the appliance is safe to use based on
scientific evidence available today.
Before first use
appliance
1
Clean all parts except the motor unit (see chapter 'Cleaning').
2
Wind excess mains cord round the base of the motor unit (Fig. 2).
Philips avent via cups and Philips avent weaning spoons
Always clean and sterilise the cups, lids and weaning spoons before you use them.
Using the appliance
Blender
The blender is intended for:
-
Pureeing cooked ingredients, e.g. for making baby food.
-
Blending fluids, e.g. dairy products, sauces, fruit juices, soups, mixed drinks, shakes.
-
Mixing soft ingredients, e.g. baby drink.
1
Put the ingredients in the blender beaker (Fig. 3).
Do not fill the blender beaker beyond the MAX indication.
Never fill the blender beaker with ingredients that are hotter than 80°C.
See the table below for the recommended quantities.
Ingredients blender
fruit
vegetables
fruit juice
milkshake
soy beans
almond tea
black sesame tea
2
Press the lid into place.
3
Place the blender beaker on the motor unit (1). Turn the blender beaker clockwise to fasten
it (2) ('click') (Fig. 4).
Do not exert too much pressure on the blender beaker.
Quantities
20g
100g
100g vegetables + water (optional)
100g fruit + 150ml milk
50g soy beans (soaked for 4 hours) + 250ml
water
75g almonds + 200ml water
75g black sesame seeds + 200ml water

Publicité

loading