Philips AVENT SCF860/20 Mode D'emploi page 10

EngliSh
10
- If the appliance shakes because the food is not evenly distributed, switch off the appliance and
disassemble the wet mill. Distribute the ingredients evenly in the wet mill beaker, reassemble the
wet mill and screw it onto the motor unit. Then switch on the appliance again.
- To use the wet mill beaker as a container, turn it upside down and put the plastic lid on the wet
mill beaker (Fig. 11).
Philips avent via cups and Philips avent weaning spoons
You can use the Philips AVENT VIA cups to store baby food in the fridge or freezer. With additional
Philips AVENT VIA accessories, you can also use them to express breast milk or to feed your baby.
You can use the Philips AVENT weaning spoons to feed your baby.
Note: You can use the Philips AVENT VIA cups and Philips AVENT weaning spoons several times. Throw
them away when they show signs of wear and tear.
1 Sterilise the cups, lids and weaning spoons before first use and before each subsequent use.
Note: You can use a Philips AVENT steam steriliser to sterilise the cups, lids and weaning spoons. You can
also sterilise the cups, lids and weaning spoons by boiling them for 5 minutes.
Note: Wash your hands thoroughly before you touch sterilised items and make sure the surfaces on which
you place sterilised items are clean.
2 Put the prepared food in the Philips AVENT VIA cup.
3 Write down the content and date of storage on the Philips AVENT VIA cup. (Fig. 12)
Note: Food prepared at home can be stored in the fridge for up to 48 hours or in the freezer for up to 3
months. For ready-made foods, follow the instructions on the package.
4 Place the lid on the cup and turn it clockwise to fix it (Fig. 13).
- Philips AVENT VIA cups have twist-on lids for easy and leakproof storage and transport (Fig. 14)
5 Use the Philips AVENT weaning spoons to feed your baby.
6 Clean the cups, lids and weaning spoons after use (see chapter 'Cleaning', section 'Cleaning
Philips AVENT VIA cups and Philips AVENT weaning spoons').
Cleaning
Cleaning the appliance
Cleaning the appliance is easiest immediately after use.
Never immerse the motor unit in water.
Do not touch the cutting edges of the blade units when you handle or clean them. They are very
sharp and you could easily cut your fingers on them.
Never clean the motor unit, the accessories and the parts in the dishwasher.
Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone
to clean the appliance.
Note: Parts of the appliance may become discoloured when the appliance is used to process ingredients
that contain a lot of pigment such as cloves, anise, cinnamon and tomato paste. This is normal.
1 Unplug the appliance and remove the blender or the wet mill from the motor unit.
2 Clean the blender or the wet mill in warm water with some washing-up liquid and rinse
them under the tap.
3 If necessary, remove the rubber sealing ring from the blender lid and rinse it with water.