Publicité
Step 32
Step
We recommend using the SAFETY STRAP for added stability.
å
NOTE: Do not turn the SAFETY DRYWALL ANCHOR into a wall stud. If you prefer to
å
fasten the SAFETY STRAP to a wall stud, go to your local hardware store for
proper hardware.
INSTALLATION INSTRUCTIONS:
å
1. Insert the SAFETY DRYWALL ANCHOR through the WASHER and the end of the
SAFETY STRAP.
2. Using a Phillips screwdriver or a hand drill, press the screw slightly onto the drywall.
3. Apply pressure; turn the screw until a pilot hole is made and the nylon sheath slips through.
4. Turn the screw until it is fl ush against the wall and you feel a fi rm resistance.
5. Continue to turn until the screw starts spinning freely.
NOTE: Before moving your unit to a diff erent location, unscrew the SAFETY DRYWALL
å
ANCHOR from your wall. The nylon sheath will remain behind your wall.
Safety
drywall
anchor
Safety strap
Page 38
Washer
411572
LARGE DOOR ON RIGHT
www.sauder.com/services
Publicité
