LENCO MC-460BK Mode D'emploi page 17

Date & Set Date and Time
Time
Set Time Format: 12 Hour or 24 Hour
Set Date Format: YYYY/MM/DD, DD/MM/YYYY, MM/DD/YYYY
Daylight Saving Time (DST): On or Off
⚫
ON
Tips: When "ON" is selected, the time will be one hour later than the
current time.
⚫
OFF
Tips: When "OFF" is selected, the time will be same as the current time. If it
was already in "Daylight Saving Time(DST)" and you choose"OFF", the time
will be deducted by one hour, that's to say, the time will be same as the
actual time.
Alarm
There are 3 independent Alarms which can be set. 2 different Alarms
(Alarm 1, Alarm 2) and one NAP alarm which is a countdown alarm which
can be used when doing a quick sleep.
Press the Alarm button on the remote control to enter the alarm settings
menu directly and follow the following steps.
Setting the alarm
Press 'Alarm' button on remote control
-
- Select Alarm 1
- Select Turn On
Press the 'ok' button on the remote or press the navigation wheel on
-
the unit.
Press the 'ok' on the "Repeat:" option and select the how the alarm
-
should work.
(Everyday, once or select the required days)
- Press the left arrow key on the remote or unit to return to the
previous alarm menu, then select "Time:" and press 'ok'
- You now can use the up down buttons to change the highlighted
Hours then press the right arrow button once to switch to the
Minutes and use the up/down buttons to change the minutes. Press
the 'ok' button to confirm.
Select the "Sound:" and press the 'ok' button. Now you can choose
-
between Beep, Melody, Internet Radio, FM, DAB/DAB+,USB,CD mode.
When internet radio is selected as wake up sound, you can use one
of your favorite radio stations (which have to be stored as favorite
on the MC-460).
17