LENCO MC-460BK Mode D'emploi page 16

CONFIGURATION
Here you can configure various parts of your Lenco MC-460 press 'Enter' to select the
configuration menu.
Time Analog/Digital
Display
Manage When it is enabled, my mediaU will show on the main menu. If various
mediaU accounts exist in the Radio, Select the default login account in here.
my mediaU
Network Wireless Network Configuration: Enable/disable WiFi network. When you
enable the WiFi network, the system will automatically select the required
AP. Enter WEP or WPA code to connect the WiFi.
Wireless Network (WPS PBC): If you are using a router with WPS/QSS
button, you can set up the network connection easily via WPS function.
Enter it and go to press the WPS/QSS button on your router within
120 seconds. The connection between the router and device will then be
configured automatically.
Manual Configuration: You can choose DHCP (which assigns the ip address
automatically) or manually input the IP address for wireless network
connection. The following information has to be entered: SSID (name of
access point), IP Address, subnet mask, default gateway, preferred DNS
server, alternate DNS server.
Check Network When Power On: Enable/disable WiFi network. When you
enable the WiFi network, the system will automatically search for available
AP. Select the required AP.
16