KRUG+PRIESTER IDEAL AP30 PRO Mode D'emploi page 40

Troubleshooting
The switch button is lit up only dimly or not lit
up at all.
Automatic mode is not working properly.
Odours are not being filtered properly.
AP30 40 PRO DE-NL 08-2022 9700281 20240318zm
Is the air purifier switched on?
 Switch on the air purifier by pressing the
switch button (page 30).
Has the Quiet function been activated?
 If you press the switch button once, the air
purifier switches to automatic mode.
 Disable the Quiet function by selecting a
different fan speed via the app or on the
remote control (only IDEAL AP40 PRO).
The air purifier is calibrating the air quality
sensor. This happens when you first switch it
on and after disconnecting it from the mains.
 Wait until the calibration process has been
completed (this may take a few minutes)
The air quality sensor is not detecting the air
quality reliably.
 Calibrate the air quality sensor by briefly
disconnecting it from the mains again!
Is the air purifier continuously exposed to
strong odours?
 The filter needs to be changed
(page 35-36) because the activated
carbon filter becomes saturated and
reliable air purification is no longer
guaranteed.
Are the odours being drawn in at all?
 Place the air purifier closer to the source
of the odours.
 Switch the air purifier manually to a higher
fan speed (page 30).
40