KRUG+PRIESTER IDEAL AP30 PRO Mode D'emploi page 29

Unpacking and setting up
A
Note:
Use the original packaging to store the air purifier if you are not using it all year round. Pack and
store the filter cartridge airtight to protect the activated carbon.
AP30 40 PRO DE-NL 08-2022 9700281 20240318zm
A
B
Take the textile cover (only IDEAL AP40 PRO)
out of the protective film, place it around the
filter cartridge and close it at the back (locking
component A).
Insert the filter cartridge with the three snap-fit
tabs into the three recesses provided for this
and lock it at the locking component (A)
Connect the power cable to the device first, then
to the socket.
If the filter cartridge is missing or not installed
correctly, the switch button (B) flashes red and
the air purifier will not work.
Safety information
No operation of the air purifier without the
complete and secure attachment of the
cladding and safety covers
(Motor protection grille, filter cartridge, etc.).
29
.