KRUG+PRIESTER IDEAL AP30 PRO Mode D'emploi page 30

Operation
AP30 40 PRO DE-NL 08-2022 9700281 20240318zm
B
Startup / Fan speeds
1. Plug in the power cable, press the switch
button (B). The air purifier starts in
automatic mode
lights up.
2. Press the switch button to exit automatic
mode. The air purifier now runs at
fan speed 1
once.
3. Press again to increase the fan speed
to 2 . The switch button flashes twice.
Press again to increase the fan speed
to 3 (flashes 3 times) or to the turbofan
speed T (flashes 4 times).
4. If you press the switch button again, the air
purifier switches to the Quiet function
The switch button lights up, but only dimly.
The Quiet function is provided for

particularly low-noise, unobtrusive operation
(e.g. bedrooms).
The air purifier switches to the lowest fan
speed.
5. When the switch button is pressed again,
the air purifier returns to
automatic mode
Note:
The air purifier can be switched off by pressing
and holding down the switch button. Just press it
to switch the device back on.
30
. The switch button
. The switch button flashes
.
.