Publicité
®
R&S
RT-ZZ80
1.3.1
Inspecting the Contents
● Inspect the package for damage.
Keep a damaged package and the cushioning material until the contents have
been checked for completeness and the instrument has been tested.
If the packaging material shows any signs of stress, notify the carrier as well
as your Rohde & Schwarz service center. Keep the package and cushioning
material for inspection.
● Inspect the probe.
If there is any damage or defect, or if the R&S RT-ZZ80 transmission line
probe does not operate properly, notify your Rohde & Schwarz service center.
● Inspect the accessories.
If the contents are incomplete or damaged, notify your Rohde & Schwarz ser-
vice center.
Accessories supplied with the instrument are listed in
ries
Supplied",
1.4
Description of the Probe
The probe consists of the probe head for connection to the DUT, the probe cable,
and the SMA connector.
Probe connection:
● To a base unit with SMA inputs: direct connection
● To a base unit with BNC connectors: using the SMA to BNC adapter delivered
with the probe
1.4.1
Probe Head
The small and lightweight probe head is designed for easy handling and high-per-
formance measurements. The probe head is used for connecting the probe and
the DUT. Different accessories for the signal and ground sockets allow the probe
head to be connected to a wide range of DUTs.
User Manual 1409.7689.02 ─ 02
on page 11.
Product Description
Description of the Probe
chapter 1.5.1, "Accesso-
8
Publicité
