Ariens BL 300 Livret D'utilisation Et D'entretien page 35

Ariens
Starting the engine of the machine always follow these instructions very carefully:
•
Check the oil in the engine : THE BRAND NEW MACHINE IS DELIVERED WITHOUT OIL IN THE ENGINE,
THEREFORE YOU SHOULD FILL IT UP TO THE LEVEL ON THE DIP STICK OF THE OIL CUP.
•
Please check the engine USE AND MAINTENANCE concerning the "operations before staring".
•
Start the engine only in open spaces.
1. Pull the choke lever on the engine.( where present is)
2. Turn the accelerator lever "F" to the "MAX" position (Pict. 8a and 8b). The switch (Ref. "K" Pict. 8b) must be "ON".
3. The clutch lever "G" should be released in position "a" (Pict. 9-10).
4. Pull the starting rope by the handle "I" smoothly first than strongly: when you feel some resistance don't leave the handle but
help the recoiling of the rope with your hand (Pict. 11).
5. When the engine runs move the choke lever to the initial position and the accelerator lever in the mid-position (Pict. 8a and 8b
Ref. "F").
6. For stopping the engine move the accelerator lever "F" in "STOP" position (Pict. 8a) and the switch (Ref. "K" Pict. 8b) must be
"OFF".
35
STARTING AND STOPPING THE MACHINE
BL 300 / BL 350