Publicité
Les langues disponibles
Les langues disponibles
05 MAINTENANCE
PRE-FILTER (CLEAN EVERY 2~4 WEEK)
23
1
To open, pull the top of the back cover.
2
To remove the pre-filter, pull its clip.
· _ B e careful not to let dust fall off when removing.
3
Remove dust with a vacuum cleaner or
water depending on the degree of dust
and particles.
· _ D o not let dust fall into the air vent hole when
cleaning.
4
Install the dry pre-filter completely
into the product. Please close the back
cover again.
NOTE
Always unplug the power plug before cleaning the
filter.
The pre-filter can be reused by removing dust or
washing with water.
Failure to clean the pre-filter for a long time may
result in poor product performance.
The Max2 filter cannot be washed and reused.
https://manual-hub.com/
Publicité
