Publicité
Les langues disponibles
Les langues disponibles
04 OPERATION
ADJUST PARTICLE SENSOR
When the product is operated for the first time, the air quality sensor is set to default sensitivity. If the air quality
level remains high after running the air purifier for more than 2 hours, or if the air quality level stays clean after
operating the air purifier for more than 1 hour, increase or decrease the sensor sensitivity.
19
1
While the product is operating, press
the mode button and the light button
simultaneously for more than 2 seconds.
Pull the top of the back cover to open.
2
The current set sensitivity level is
displayed on the indicator.
The default sensitivity is Level 2.
·
3
Press the mode button to adjust the
desired sensor sensitivity. The mode
button blinks as shown below once sensor
sensitivity has been selected.
Display
1
Sensitivity
Sensitive
4
Press the mode button and the light
button simultaneously for more than 2
seconds, the selected sensitivity will be
input, and the product will start operating
normally.
I f the mode button and the light button are not
·
pressed for 10 seconds, the selected sensitivity of
the sensor is automatically entered.
https://manual-hub.com/
2
3
Normal
Insensitive
Publicité
