Use this cycle for china and
crystal, This cycle uses a
_+_J,
light wash and gentle dry.
.....
During the heated dry, the
heating element cycles on
and off.
Use main detergent
dispenser section.
Soil
Wash
Main
Rinse
Rinse
Final
Dry
Time
Water
Level
Wash
or
Heated
(rain)
Usage
Sensed
Purge
Rinse
(gal/L)
•
•
•
•
•
79*
7,1-8.6/
Heavy
135°F
cycled
26,9-32,6
(67oc)
•
•
•
•
•
70*
5.9/22,2
Light
Purge
135°F
cycled
(57oc)
During the first fill of a cycle
1. Open the door.
2. Press a new cycle and/or options.
3. Check the detergent dispensers, They must be filled properly
for the new cycle.
4. Close the door. The dishwasher resumes the new cycle and/
or option after a 5-second pause.
After the first fill of a cycle
1. Press
Use this rinse cycle for
.....
rinsing dishes, glasses,
and silverware that will
not be washed right
Do not use detergent
away.
with this cycle.
Wash
Main
Rinse
Rinse
Final
Dry
Time
Water
Wash
Heated
(rain)
Usage
Rinse
(gal/L)
•
10
1.8-2.1/
6.8-7.9
* Cycle time includes dry time. An asterisk ( * ) by the cycle time
indicates the cycle time might be longer depending on the
temperature of the water entering the dishwasher. The cooler the
water, the longer the cycle time. If the water is already hot
enough, the cycle time will be as shown.
....... + ..........
"
:V;Y _;_: %¢+Y%+ + .....
Anytime during a cycle, press
The display shows
Your dishwasher
starts a 2-minute drain (if needed). Let the
dishwasher drain completely. The light turns off after 2
minutes.
NOTE: If your dishwasher
does not need draining, the light
turns off.
2. Open the door,
3. Select a new cycle and/or options.
4. Check the detergent dispensers, They must be filled properly
for the new cycle.
5. Close the door.
6. Press START.
The display shows
Your dishwasher
starts a 2-minute drain (if needed). Let the
dishwasher drain completely. The light turns off after 2
minutes.
NOTE: If your dishwasher
does not need draining, the light turns
off. Select a new cycle and options.
To stop the drain
You can press Cancel/Drain
again to stop the drain immediately.
Remember to drain the dishwasher before starting a new cycle.
To clear the indicators
Press Cancel/Drain
before starting the dishwasher to clear all
options and cycles.
You can add an item anytime before the main wash starts. Open
the door and check the detergent dispenser. If the cover is still
closed, you can add items.
To add items
1. Lift up the door latch to stop the cycle. Wait for the spraying
action to stop before opening the door.
2. Open the door. If the detergent dispenser cover is still closed,
add the item.
3. Close the door firmly until it latches. The dishwasher
resumes
the cycle after about a 5-second pause.
You can customize your cycles by pressing an option. If you
change your mind, press the option again to turn the option off,
or select a different option if desired.
You can change an option anytime before the selected option
begins. For example, you can press an unheated drying option
any time before drying begins.
Press START to use the same cycle and option(s) as the previous
wash cycle.
NOTE: If the last cycle you completed was a rinse cycle, when
you press Start, the dishwasher
runs the last full wash cycle and
options.
15