Publicité
Les langues disponibles
Les langues disponibles
Mesh Filter Clean Indicator (always enabled)
- After 30 hours of fan usage the
the mesh filters. Graphic and words will remain illuminated until reset.
- To reset: With liner off, hold the
" will turn off and the 30 hour timer will reset.
filter
Clean Air Indicator
- Clean Air is a feature that turns the fan on every 4 hours for 10 minutes to remove stagnant air in the kitchen.
- To enable Clean Air Function:
- With liner off, hold the
words "
clean air
will turn off and the 4 hour timer will begin.
-
Graphic will remain on when Clean Air Function is enabled, even if fan is not on.
- To disable Clean Air Function:
- With liner off, hold the
turns off.
- If the user changes the fan speed while the Clean Air Function is in use, the words "
will remain illuminated. If the user presses the
Graphic and words "
clean mesh filter
Button for three seconds, after three seconds the
Button and
Button simultaneously for three seconds. The
" will illuminate and the fan will turn on speed 1 for 10 minutes. After 10 minutes the fan
Button and
Button simultaneously for three seconds until
Button at any time the 4 hour clean air timer will reset.
16
www.zephyronline.com
" will illuminate indicating it is time to clean
Graphic and words "
clean mesh
" will turn off but the
clean air
Graphic and
Graphic
Graphic
Publicité
