Publicité
Les langues disponibles
Les langues disponibles
SETTINGS
Turn the "Functions" knob indicator to the symbol
changed.
Clock
Turn the "Functions" knob to the symbol
previous paragraph (SETTING THE TIME).
Eco
With the ECO mode selected (ON), the display switches off when the oven is on standby or 5 minutes after the end of cooking.
In addition, the oven light is switched off during cooking. To view information on the display and switch the light on again,
simply press button
or turn a knob.
3
1.
Turn the "Browse" knob to display "ECO.
2.
Press
to access the setting (ON/OFF).
3
3.
Turn the "Browse" knob to select the desired setting and confirm by pressing button
Acoustic signal
To activate or deactivate the acoustic signal, proceed as follows:
1.
Turn the "Browse" knob to display "SOUND.
2.
Press
to access the setting (ON/OFF).
3
3.
Turn the "Browse" knob to select the desired setting and confirm by pressing button
Brightness
To change the display brightness, proceed as follows:
1.
Turn the "Browse" knob to display "BRIGHTNESS.
2.
Press button
: number 1 appears on the display.
3
3.
Turn the "Browse" knob to increase or decrease brightness and confirm by pressing
AUTOMATIC OVEN CLEANING
For the description of this function, see the chapter CLEANING and the functions table at page 28.
To activate the oven's automatic cleaning cycle (pyro-cleaning), proceed as follows:
1.
Turn the "Functions" knob to symbol
2.
Press button
to confirm your choice and start the pyro-cleaning cycle.
3
To select ECO pyro-cleaning, turn the "Browse" knob: the word ECO appears bottom right on the display. Press button
the shorter programme.
During pyro-cleaning, the oven door is automatically locked and the symbol
at the end of the cleaning cycle: "COOL" appears on the display, indicating the oven is still cooling down. When the oven cools
to a safe temperature, the symbol
N.B.: the automatic door lock control procedure fails to execute properly, the symbol
hand, the door remains closed due to a fault in the locking system,
contact the After-sales Service.
to access a submenu containing four display settings which can be
: the word CLOCK appears on the display. To change the time of day, see the
: the word PYRO appears on the display.
switches off and the display shows "END".
GB27
.
3
.
3
.
3
appears on the display. The door remains locked
appears on the display. If, on the other
and "DOOR LATCHED" appear on the display. In this case,
to start
3
Publicité
