Publicité
Les langues disponibles
Les langues disponibles
ReMoVInG anD InstallInG tHe DooRs
You may not need to remove the doors, but if you have trouble getting the unit
into its final location, please follow the below door removal and installation
instructions. It is suggested, for your safety, to have two or more people to assist
you in completing the below task to avoid bodily injury, product damage, or
property loss.
It is extremely important for the water line connector and tubing on the back
panel to be reattached properly. Failure to do so can result in a leak at the con-
nection or dripping at the dispenser.
How to Disconnect the Water line (only applicable to Hb21fc75*)
1) Unplug unit from power source and remove the top hinge cover (5 screws)
and water line cover (1 screw).
2) Disconnect the plastic water line from the connector on the back panel by first
removing the black locking clip on one end of the connector. (Illustration 1)
[Illustration 1]
Black Locking
3) Depress the white end of the union inward while pulling the tubing outward.
Repeat for the other end. (Illustration 2)
[Illustration 2]
White End of
the Union
4) Pull the water line A out of cabinet from the front of unit as seen in Illustration
4.
5) To disconnect the electrical wires, push down on the locking tab of the plastic
connectors and gently pull the two ends apart.
English
Color Mark
6
Publicité
