Publicité
Les langues disponibles
Les langues disponibles
Right french Door Removal and Installation
1. Remove the screws on the top hinge cover, then set aside the top hinge cover
and lay it down for installing later.
2. Using a proper tool, remove the top hinge screws. Remove the hinge, then
take the refrigerator door off and place it aside for the time being.
3. Remove the middle hinge, if needed.
4. Re-install the refrigerator door in reverse sequence.
When lifting up the refrigerator hinge and separating it from the door body,
please be careful not to drop the door. It could cause bodily harm or damage.
Removing and Installing freezer Drawer
1. First open the drawer as far as possible, and then remove the screw on each
side of the drawer as seen in illustratin 5.
2. Then pull the drawer body up and towards you, and put it aside in a safe
place as seen in illustratin 6.
3. Re-install the drawer in the reverse order.
caution: Keep children from playing inside the freezer drawer as a
hiding place. Use caution after drawers are removed, due to the
possibility of the plastic track protruding from unit.
Illustration 5
Disconected the cable,crew out the earth line.Disconected the
Disconected the cable,crew out the earth line.Disconected the
Disconected the cable,crew out the earth line.Disconected the
water pipe on the back at the same time,pull out the pipe from
water pipe on the back at the same time,pull out the pipe from
water pipe on the back at the same time,pull out the pipe from
the cabinet,then take the door off.(only PBFS21* and PRFS25*)
the cabinet,then take the door off.(only PBFS21* and PRFS25*)
the cabinet,then take the door off.(only PBFS21* and PRFS25*)
(IF REQUIRED)
Illustration 6
English
Disconected the cable
water pipe on the bac
the cabinet,then take t
8
Publicité
