Power Dynamics 172.630 Manuel D'instructions page 5

40. MP3 Display
Show the MP3 time, song name and other play instruction.
41. MP3/BT Command
STOP: Press shortly to stop playing. Press for seconds for recording, also press 2 seconds to stop recording.
PREV / NEXT: Turning the program control.
PLAY: Press the program control knob.
REP: Repeating of single track or all tracks.
Program Dial
You can select the MP3 preset by turning the program control. The display flashes with the number of the current
preset. To recall the selected preset, press on the button; the flashing stops
42. MP3 EQ
Two-band equalizer adjusts the level if the two bands MP3 player.
43. Phantom +48V
This switch toggles phantom power on and off. When the switch is on the mixer supplies +48V phantom power to all
channels that have XLR input jacks. Turn this switch on when using one or more phantom-powered condenser
microphones.
44. VU-Meter
Displays the signal of output.
NOTE: The "0" segment corresponds to the nominal output level. The peak indicator lights up red when the output
reaches the clipping level.
45. Aux Control
Use this fader to control the aux output jack.
46. Main Mix Fader
You use the high-precision quality faders to control the output level of the main mix.
47. BT-Function
Contact mobile phone or tablet.
Connecting: Press the "contact switch" for two seconds, then the signal LED light up, use your mobile phone
or tablet and choose "MIXER-01" BT-connection.
48. PFL indicator
When open the monitor, PFL is lighting.
49. Headphone/Room Level
Use this control to adjust the output level of headphone.
50. Headphone Input
6.3mm (¼") input jack for connecting a headphone.
5