Wilfa CHILL 12 CONNECTED Manuel D'instructions page 14

INSTRUCTION MANUAL · AIR CONDITION
Step 3: Extend the adjustable window kit the length of your window. Connect the
exhaust hose to the window kit.
EN
Step 4: Close your window to secure the kit in place. It needs to hold the win-
dows kit firmly in place, secure the window kit with duct tape if required. It is
recommended that the gap between the adapter and the sides of the window
should be sealed off for maximum efficiency.
Step 5: Attach the hose connector to the exhaust air outlet of unit.
Step 6: Adjusting the length of the flexible exhaust hose, to make sure the
distance between the unit and the window will be more than 70cm, height from
exhaust hose to the floor will be more than 90cm. And avoid bends in the hose.
Then place AC near an electrical outlet.
12