Tristar SM-6000 Mode D'emploi page 17

Winding of the bobbins
Figure 1
• Place a yarn pin on the spool pin (no.1).
• G uide the thread through the winding thread guide (no. 2) to the empty
bobbin.
• P lace the bobbin winding pin (no.18) on the machine.
• Wind the thread several times clockwise to the empty bobbin and place
it on the bobbin winding pin (no.18).
Figure 2
• Turn the hand wheel (no. 11) clockwise until the thread is tightened.
• S tart electric winding by pressing the foot control.
• W hen the bobbin is full, release the foot pedal, cut the thread, then
remove bobbin
Sewing machine
EN
17