Tristar SM-6000 Mode D'emploi page 16

Instruction manual
Lower thread
• When inserting or removing the lower bobbin, the needle must be fully
raised.
• Turn the hand wheel (no.11). Pull out the plastic transparent cover (no. 9).
• Insert the bobbin in the bobbin case, so that the thread rund in a
clockwise direction.
• Replace the transparent cover (no. 9)
• Raise the presser foot, hold the upper thread with the left hand, right
hand turn the handwheel anticlockwise until the needle is raised.
• When the needle reach the bottom, the hook tray will hook the upper
thread, rotate the hook tray to pull the lower thread out.
• Pull the lower and upper thread under presser foot (no. 8), pull out
10 cm to the back.
16
8
11