Publicité
Les langues disponibles
Les langues disponibles
Programming
TOTAL COFFEES
NA
This function displays the number of coffees already
dispensed by the appliance.
Use the
key to select the function:
TOTAL COFFEES
TIMER
Enable it with the
The display shows (e.g.):
TOTAL COFFEES
Press
key to exit.
TIMER
This function enables you to save energy when the
machine is not used for long periods.
This function is preset by the manufacturer and is
automatically enabled.
STANDBY
after 3 hours from the use.
! Switch-off time can be regulated at 15-minute intervals
with a minimum of 15 minutes. The function cannot be
disabled.
Use the
key to select the function:
TIMER
CLOCK
Enable it with the
The display shows:
ENERGY SAVING
AFTER
Select the automatic switch-off interval by pressing the
key and use the
! Note: if automatic switch-on/off times are enabled in
"CLOCK" mode, this function will be ignored.
20
*
key.
81
*
key.
3:00
key to save.
CLOCK
This function is enabled and/or disabled by the user
and:
- displays the exact time when the machine is in
"STANDBY" or "SELECT FUNCTION" mode.
- selects the on/off time.
To correctly program this function, the exact time must
be set
Use the
key to select this function:
CLOCK
RINSING CYCLE
Enable it with the
key.
Use the
key to select this function:
CLOCK TIME
ON/OFF TIME
Enable it with the
key.
CLOCK TIME
Set the current time by pressing the
save using
key;
Next, press the
key to set the minutes and save
using
key.
The time is set and the machine returns to the previous
menu.
! Note: the time is memorised when the machine is
switched off.
To display the time
Use the
key to select this function:
SHOW CLOCK TIME
AUTOMATIC ON/OFF
Enable it with the
key.
*
*
0:00
key and
*
Publicité
