Publicité
Les langues disponibles
Les langues disponibles
WATER HARDNESS
Water hardness varies according to geographical
region. Hence, the machine must be regulated for
the hardness of the water used. This is expressed on
minute the test results are visible. Check the number
of squares that have changed colour.
Use the
key to select this function:
WATER HARDNESS
WATERFILTER
Enable it with the
key.
The display shows:
WATER HARDNESS
HARDNESS 3
Select the right hardness using the
squares = Hardness 2) and save using the
! Warning: this setting allows the machine to notify
when it is time for descaling treatment.
The display shows:
READY FOR USE
DECALCIFY
WATER FILTER (where installed)
This function provides better management of the
"water filter (where installed), notifying the user when
the filter is to be replaced.
! The function must be enabled when installing the
water filter for the first time.
a scale of 1 to 4. The
appliance is already
programmed for
average hardness (3).
To regulate hardness,
briefly dip (1 second)
the strip provided in
water.
Next, shake the strip
gently to eliminate
excess water. After one
*
key (e.g. 2
key.
Use the
key to select this function:
WATERFILTER
TEMPERATURE
Enable it with the
key.
The display shows:
WATERFILTER
OFF
Use the
key to select
WATERFILTER
ON
and press the
key to confirm.
! The "RESET" must be given whenever a new
cartridge filter is installed.
For this command, use the
function:
WATERFILTER
RESET
Enable it with the
key.
TEMPERATURE
This function regulates the temperature of the water
for coffee (high, medium and low).
Use the
key to select the function:
TEMPERATURE
PROGR. COFFEE LENG.
Enable it with the
key.
The display shows (e.g.):
TEMPERATURE
MEDIUM
Select the required temperature by pressing the
key and use the
*
key to select the
*
key to save your choice.
NA
17
Publicité
