Publicité
Les langues disponibles
Les langues disponibles
troubleshooting
PROBLEM
Motor does not start.
Suction force is gradually
decreasing.
Cord does not rewind fully.
Vacuum cleaner does not pick
up dirt.
Low or decreasing suction
Body overheating
Static electricity discharge
This Vacuum cleaner is approved the following.
EMC Directive : 2004/108/EEC
Low Voltage Directive : 2006/95/EC
SOLUTION
• Check cable, plug and socket.
• Leave to cool.
• Check for blockage and remove.
• Pull the cord out 2-3m and push down the cord
rewind button.
• Check hose and replace if required.
• Please check filter and, if required, clean as
illustrated in the instructions. if filters are out of
condition change them to new ones.
• Please check filters, If required clean as
illustrated in the instruction.
• Please decrease power suction.
troubleshooting _15
Publicité
