Volpi Kamikaze KV380 Mode D'emploi page 40

E. Remove the rubber cover
G. Turn counterclockwise as shown in the
picture, remove the M3 screws from the blade
cover.
I. Clean up the rubbish as shown and grease it.
40
E
F. Turn counterclockwise to remove the hexagon
socket screw
G
H. According to the direction shown in the
picture, remove the blade cover and take the
blade.
I
L. According to the direction shown in the figure,
grease the gear of the moving blade, insert the
moving blade and close with the cover.
F
H
L