Publicité
Les langues disponibles
Les langues disponibles
HWP & HWT SERIES
3.4 HOSE CONNECTIONS
Rubber Seal
1.
Insert adapters into each end of the suction and discharge hoses.
2.
Attach O-Rings to the adapters.
3.
Tighten the hose clamp around the discharge hose.
4.
Insert strainer into the suction hose and tighten the hose clamp around the
hose.
5.
Insert adapters into the appropriate pump fittings.
Discharge Hose
(not included)
Hose Coupler Ring
Hose Clamp
Hose Coupler
Hose Clamp
Suction Hose
(not included)
Suction Hose
(not included)
19
Strainer
Publicité
