Publicité
Les langues disponibles
Les langues disponibles
HWP & HWT SERIES
3. PRE-OPERATION CHECK
Inspect all components for damage and to ensure that none are missing. If you
require a replacement, do not operate this tool until all parts are present and in proper
working order.
Note
Do not modify or create accessories for this equipment. Using modified
components may result in damage and may void the warranty. Contact
customer service if you suspect that this equipment has been tampered
with.
3.1 CHECK THE OIL LEVEL
1.
Ensure the pump is on a level surface.
2.
Unscrew the oil cap and clean the dipstick.
3.
Check the oil level by reinserting the oil cap without rethreading it. Remove
the oil cap and examine the oil level on the dipstick. If the oil level is at or
below the minimum, fill the oil reservoir up to the edge of the oil fill hole.
4.
Reinsert the oil cap and tighten securely.
Note
HWP150 oil capacity is: 400ml.
HWP270, HWP370 and HWT370 oil capacity is: 600ml.
DO NOT OVERFILL.
MAX. LEVEL
MIN. LEVEL
15
Publicité
