Télécharger Imprimer la page

Getac S410 Serie Manuel De Fonctionnement page 8

Masquer les pouces Voir aussi pour S410 Serie:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 23
If your device is used for long periods, its
surface can become very warm. While the
temperature may not feel hot to the touch,
if you maintain physical contact with the
device for a long time, for example if you
rest the device on your lap, your skin might
suffer a low-heat injury.
If your device is on your lap and gets uncom-
fortably warm, remove it from your lap and
place it on a stable work surface.
Never place your device or AC adapter on
furniture or any other surface that might be
marred by exposure to heat since the base
of your device and the surface of the AC
adapter may increase in temperature during
normal use.
Regulatory Information
USA
Federal Communications Commission
Radio Frequency Interference Statement
NOTE:
This equipment has been tested and found to
comply with the limits for a Class B digital device
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not
installed and used in accordance with the instruct-
tions, may cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the equip-
ment off and on, the user is encouraged to try
to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equip-
ment and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the re-
ceiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.
Any changes or modifications not expressly
approved by the manufacturer could void the
user's authority to operate the equipment.
6
Please note:
The use of a non-shielded interface cable with
this equipment is prohibited.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference
received, including interference that may cause
undesired operation.
FCC RF Exposure Information
This device has been tested and meets appli-
cable limits for Radio Frequency (RF) exposure.
For general notebook computers in normal use,
you (or any other person in the vicinity) should
keep a minimum separation distance of 20 cm
away from the front panel of the device to
ensure that the RF exposure levels comply with
the RF exposure requirement.
For devices designed to be operated at closer
proximities, their antennas cannot satisfy the
separation distance. Such devices are evaluated
with the Specific Absorption Rate (SAR). You
(or any other person in the vicinity) should keep
a minimum separation distance of 25 mm away
from the front panel of the device to ensures
that the RF exposure levels comply with the RF
exposure requirement.
Company name Getac Inc.
15495 Sand Canyon Rd., Suite 350
Address
Irvine, CA 92618 USA
Phone
+1-949-681-2900
California Perchlorate Material Notice
Perchlorate material - special handling may
apply. See:
http://www.dtsc.ca.gov/hazardouswaste/
perchlorate/
This product's real-time clock battery or coin cell
battery may contain perchlorate and may require
special handling when recycled or disposed of in
California.
Canada
Canadian ICES-003
CAN ICES-3(B)/NMB-3(B)
This device contains licence-exempt transmitter(s)/
receiver(s) that comply with Innovation, Science
and Economic Development Canada's licence-
exempt RSS(s). Operation is subject to the follow-
ing two conditions: (1) This device may not cause
interference. (2) This device must accept any
interference, including interference that may
cause undesired operation of the device.

Publicité

loading