GE JGP932 Instructions D'installation page 10

COOKTOP BURNERS
ASSEMBLING THE COOKTOP
1
BURNERS
The electrode of the spark igniter is exposed.
Be careful not to push any cooktop controls
while the top of the burner is removed.
Do not remove the top or touch the electrode
of any burner while another burner is turned
on. Electrical shock might result.
FOR PORCELAIN COOKTOPS
Place the burner head on the burner
A
base so that the pins match up with the
slots on the base.
Position the burner cap on the burner
B
head.
C Place the burner grate over the burner
assembly on the porcelain units. The
bottoms of the burner grates have feet
that fit into corresponding indentations
in the cooktop.
Burner
Grate
Burner
Base
Burner Box
Bottom
Installation Instructions
Burner Cap
Burner Head
Spark Igniter
Spark
Igniter
FOR GLASS CERAMIC COOKTOPS
A Place the burner head on the burner
base so that the pins match up with
the slots on the base.
B Position the burner cap on the burner
head.
Place the burner grate over the burner
C
assembly on the ceramic units. The
grate fits over the raised area on the
burner head.
Burner
Grate
Burner
Base
Maintop
Front Trim
10
Burner Cap
Burner Head
Spark Igniter
Burner Box
Bottom
Spark
Igniter