Publicité
Les langues disponibles
Les langues disponibles
▶ Do not use the air filter in the vicinity of flammable and explosive gases.
▶ Make sure that the product is so steady that there is no risk of it tipping over.
▶ Avoid tilting the product while it is in operation. The flow of air from the air discharge can swirl dust off
the floor if the flow of air is directed toward the floor.
▶ Avoid moving the product while it is in operation.
▶ When the product starts up, it produces a strong current of discharged air. This can swirl up dust in the
product's immediate vicinity.
▶ Always switch the product off at the main switch! The start-up capacitor can carry an electrical charge
even after the plug has been disconnected from the power outlet.
▶ Do not use the product to filter hot or incandescent fragments or particles. Make sure that the temperature
of the inducted contaminated air does not exceed 60 °C (140 °F).
▶ Do not permit the product to become overloaded or blocked because of an overfilled filter. As soon as
the indicator light for filter change shows, stop working with the product and change the filters.
▶ To reduce the risk of injury use only genuine Hilti accessories and spare parts or those of equivalent
quality.
▶ Before beginning cleaning and maintenance work, switch the product off and unplug it from the power
outlet. Before you open the filter cover, wait until the turbine has come to a complete stop.
▶ Do not transport the product by crane or with hoists.
▶ Do not stand on the product (do not use it as a substitute for a ladder).
▶ Connect the product only to a properly earthed/grounded power source.
▶ Before you unplug the supply cord of a power tool from the product's electric tool power outlet, always
first disconnect the product from the main electricity supply.
▶ Store the product and its accessories in dry rooms. Keep it out of reach of children.
3
Description
3.1
Product overview
3.2
Intended use
The product described is an air cleaner for removing fine dust particles from room air and is designed for
professional use, e.g. in hotels, stores and offices and indoors on construction sites. The product was
developed for use in dry rooms where there is no risk of explosion.
Do not use the product in environments where there is asbestos contamination.
The product is intended for indoor use only.
4
English
1
Pushbar release button
@
Pushbar
;
Pre-filter cover
=
Carrying handle
%
Electric tool power outlet
&
(only on AIC 1000 E)
Filter change indicator light
(
On/off switch
)
Transport hook for supply cord
+
Detachable supply cord
§
(not detachable on AIC 1000 E)
Discharged-air outlet
/
Main filter
:
Pre-filter
∙
Toggle catch (housing cover)
$
Shutter
£
Dust-stop partition wall adapter
|
Cover for air inlet
¡
2297302
*2297302*
Publicité
