Publicité
Les langues disponibles
Les langues disponibles
Transport by crane is not permissible
1.4
Product information
products are designed for professional users and only trained, authorized personnel are
permitted to operate, service and maintain the products. This personnel must be specifically informed about
the possible hazards. The product and its ancillary equipment can present hazards if used incorrectly by
untrained personnel or if used not in accordance with the intended use.
The type designation and serial number are printed on the rating plate.
▶ Write down the serial number in the table below. You will be required to state the product details when
contacting Hilti Service or your local Hilti organization to inquire about the product.
Product information
Air cleaner
Generation
Serial no.
2
Safety
2.1
Essential safety instructions
WARNING! READ AND SAVE THESE INSTRUCTIONS!
Read and follow all safety instructions and other instructions given in this document. Failure to follow all
instructions listed below can result in electric shock, fire and/or serious injury.
2.2
General safety instructions
▶ If the product is used in conjunction with a power tool, read the operating instructions for the
power tool before use and comply with all the instructions and warnings.
▶ Do not tamper with or attempt to make alterations to the product.
▶ Use the right product for the job. Do not use the product for purposes for which it was not
intended. Use it only as directed and when in faultless condition.
▶ Before beginning work with the product, find out how to operate it correctly and about any hazards
associated with the materials it will be inducting and how these materials can be disposed of.
▶ Take the influences of the surrounding area into account. Do not use the product where there is a
risk of fire or explosion.
▶ Only persons who are familiar with it, who have been trained on how to use it safely and who
understand the resulting hazards are permitted to use the tool. The tool is not intended for use by
children.
▶ Store the product in a secure place when not in use. Products which are not in use must be stored
in a dry, high place or locked away out of reach of children.
2.3
Workplace
▶ Ensure that the workplace is well lit.
▶ Ensure that the workplace is well ventilated. Exposure to dust at a poorly ventilated workplace may
result in damage to the health.
▶ Keep the work area clean and uncluttered and watch out for supply cords routed in the work area.
Carelessly routed supply cords can constitute trip hazards and lead to injuries.
▶ Do not operate the product in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. Electric appliances cause sparks which may ignite the dust or fumes.
2.4
Electrical safety
▶ The plug on the supply cord of the product must match the outlet. Do not change the plug in any
way. Do not use adapter plugs with earthed (grounded) products. Unmodified plugs and matching
outlets reduce risk of electric shock.
▶ Do not use the product with a damaged supply cord or plug. Return a product with damaged supply
cord or plug to an authorized Hilti service facility for examination and/or repair.
2
English
AIC 1000
AIC 1000-E
01 / (01)
2297302
*2297302*
Publicité
