Tripp-Lite U280-010-ST Manuel Du Propriétaire page 3

USB Charging
To charge your USB devices, simply connect the included external power supply between the
U280-010-ST and a power source, then plug your devices into the available ports. A single port
provides a maximum of 5V 2.4A of power.
Note: In the event that more power is being pulled than the U280-010-ST can provide, the unit's over-current
protection will cause the USB ports to cycle on and off, preventing any of the connected devices from being
charged. If this occurs, reduce the load by removing devices until the total load comes within the supported range.
Removable Storage Brackets
Customize the unit's storage space according to the number and size of devices being charged. To
install, simply insert a storage bracket into the desired slots.
Specifications
Item
Ports
External Power Supply
USB Output
Operating Temperature
Storage Temperature
Relative Humidity
Dimensions [H x W x D]
Weight
Regulatory Approvals
DEVICES
Description
(x10) USB-A Female
Input: 100-240V, 50/60 Hz; 2.0A Max Output: 12V 8A
Capable of providing up to 5V 2.4A to a single port.
41°F to 95°F (5°C to 35°C)
-4°F to 122°F (-20°C to 50°C)
20% to 80%
1 x 9.4 x 4.6 in. (26 x 238 x 118 mm)
0.65 lb. (0.3 kg)
CE, FCC, RoHS, REACH, WEEE
POWER
SOURCE