Publicité
Les langues disponibles
Les langues disponibles
setting up your dishwasher
CONTROL PANEL
DMR57 Series
DISPLAY
1
DELAY START
2
SANITIZE
3
CYCLE
4
SELECTOR
8_ setting up your dishwasher
Displays the remaining wash time, Child Lock information, and error
messages (Rinse refill, error).
If an error occurs during an operation, an error message is displayed with a
warning sound. Refer to the information codes page.
Delay a cycle for up to 24 hours in one-hour increments. The hour displayed
indicates the time at which the wash will be started.
The temperature rises to 162 ˚F (72 ˚C) in the final rinse cycle for high
temperature sanitization.
If you select the Sanitize option, the "Sanitize" indicator blinks when the water
temperature meets the sanitary temperature (over 155 ˚F (68 ˚C)), and then
illuminates for 10 minutes at the end of the cycle while it sanitizes.
The Sanitize feature is in accordance with NSF/ANSI Standard 184
for Residential Dishwashers. Certified residential dishwashers are not
intended for licensed food establishments. Your dishwasher is NSF
Certified. The cycle that is NSF certified is the Heavy Cycle with the
sanitize option selected.
You can select the appropriate wash cycle depending on the soil level of your
dishes. When a cycle is selected, the indicator for that cycle lights up. If you
want to cancel the selected cycle, press the selected cycle button again.
1
Publicité
